PRODOTTI
Richiestissime dal mercato, le chiusure rapide a settori sono composte da due parti, un anello flangia ed un coperchio. In Questa tipologia di chiusura rapida è azionata attraverso lo sblocco del sistema di settori che consente la movimentazione del coperchio.
Consigliamo l’utilizzo delle chiusure rapide a settori su apparecchi di dimensioni che vanno da DN 6’’ a DN 68’’. Esse sono adatte a rating fino ad ANSI 2500. Il team di QOC Solutions è sempre pronto a consigliare i clienti sulla scelta della soluzione ideale in base all’ applicazione finale del prodotto.
| Product Information | |
| QOC Nominal Size | From 6″ to 68″ |
| QOC Design Code | ASME VIII Div. 1 / Div. 2 / EN 13445 |
| QOC Design Pressure Rating | Up to ANSI 2500 |
| QOC Design Temperature (min/max) | -46°C / +350°C |
| Qoc Orientation | Horizontal/Vertical |
| Gasket Seal | O-Ring/Lip seal |
| Design Conditions | |
| Design Code ASME VIII Div. 1 | Yes |
| Code stamped |  |
| Vassel Wall Thickness | Acc. to the vessel |
| Vessel PWHT | |
| NACE Compliance (MR0175/ISO15156) | |
| Principal Materials | |
| Hub Material | Carbon steel/Stainless Steel/Duplex/Super Duplex |
| Door Material | Carbon steel/Stainless Steel/Duplex/Super Duplex |
| Gasket Seal | NBR/HNBR/VITON/KALREZ |
| Hinge/Davit Material | Carbon Steel / Stainless Steel |
| Pressure Warning Screw Material | Stainless Steel |
| Pressure Warning Screw Seal Material | HNBR |
| Certification | |
| Material Certification | Acc. to EN 10204 2.2/ 3.1/3.2 |
| Non-Destructive Testing | |
| M.P.I. On Weld End Preparation | |
| Dye Penetrant onWeld End Preparation | |
| Ultrasonic Examination | Yes |
| Other Requirements | |
| Inspection Requirements | |
| ASME U/U2 – Stamp Partial | |
| CE Marking | |
| Finish rough machined | N.A. |
| Finish (std) | Sandblasted and coated with zinc rich epoxy primer |
| Weld Overlay Material | |
| Nickel plating | |
| Final painting according to specification | |
| Cold galvanizing | N.A. |
| Teflon coating | N.A. |
| Mechanical Key Interlock | |
*= APPLICABLE AT REQUEST
| Product Information | |
| QOC Nominal Size | From 6″ to 68″ |
| QOC Design Code | ASME VIII Div. 1 / Div. 2 / EN 13445 |
| QOC Design Pressure Rating | Up to ANSI 2500 |
| QOC Design Temperature (min/max) | -46°C / +350°C |
| Qoc Orientation | Horizontal/Vertical |
| Gasket Seal | O-Ring/Lip seal |
| Design Conditions | |
| Design Code ASME VIII Div. 1 | Yes |
| Code stamped | |
| Vassel Wall Thickness | Acc. to the vessel |
| Vessel PWHT | |
| NACE Compliance (MR0175/ISO15156) | |
| Principal Materials | |
| Hub Material | Carbon steel/Stainless Steel/Duplex/Super Duplex |
| Door Material | Carbon steel/Stainless Steel/Duplex/Super Duplex |
| Gasket Seal | NBR/HNBR/VITON/KALREZ |
| Hinge/Davit Material | Carbon Steel / Stainless Steel |
| Pressure Warning Screw Material | Stainless Steel |
| Pressure Warning Screw Seal Material | HNBR |
| Certification | |
| Material Certification | Acc. to EN 10204 2.2/ 3.1/3.2 |
| Non-Destructive Testing | |
| M.P.I. On Weld End Preparation | |
| Dye Penetrant onWeld End Preparation | |
| Ultrasonic Examination | Yes |
| Other Requirements | |
| Inspection Requirements | |
| ASME U/U2 – Stamp Partial | |
| CE Marking | |
| Finish rough machined | N.A. |
| Finish (std) | Sandblasted and coated with zinc rich epoxy primer |
| Weld Overlay Material | |
| Nickel plating | |
| Final painting according to specification | |
| Cold galvanizing | N.A. |
| Teflon coating | N.A. |
| Mechanical Key Interlock | |
*= APPLICABLE AT REQUEST