PRODOTTI
QOC Solutions produce chiusure rapide per impianti a pressione e non, personalizzate ed ideate per rispondere ad ogni bisogno del cliente.
Tra i modelli ci sono le chiusure rapide filettate.
Le QOC filettate (THD) sono consigliate per l’utilizzo su apparecchi di dimensioni che variano da DN 2’’ a DN 12’’ con rating consigliato fino a ANSI 600.
Le chiusure rapide filettate sono azionate attraverso l’avvitamento/svitamento del coperchio/cap filettato al corpo hub saldato all’apparecchio.
| Product Information | |
| QOC Nominal Size | From 2″ to 12″ |
| QOC Design Code | ASME VIII Div. 1 / Div. 2 / EN 13445 |
| QOC Design Pressure Rating | Up to ANSI 600 |
| QOC Design Temperature (min/max) | -46°C / +350°C |
| Qoc Orientation | Horizontal/Vertical |
| Gasket Seal | O-Ring |
| Design Conditions | |
| Design Code ASME VIII Div. 1 | Yes |
| Code stamped |
|
| Vassel Wall Thickness | Acc. to the vessel |
| Vessel PWHT |  |
| NACE Compliance (MR0175/ISO15156) | |
| Principal Materials | |
| Hub Material | Carbon steel/Stainless Steel/Duplex/Super Duplex |
| Door Material | Carbon steel/Stainless Steel/Duplex/Super Duplex |
| Gasket Seal | NBR/HNBR/VITON/KALREZ |
| Hinge/Davit Material | Carbon Steel / Stainless Steel |
| Pressure Warning Screw Material | Stainless Steel |
| Pressure Warning Screw Seal Material | HNBR |
| Certification | |
| Material Certification | Acc. to EN 10204 2.2/ 3.1/3.2 |
| Non-Destructive Testing | |
| M.P.I. On Weld End Preparation | |
| Dye Penetrant onWeld End Preparation | |
| Ultrasonic Examination | Yes |
| Other Requirements | |
| Inspection Requirements |
|
| ASME U/U2 – Stamp Partial |
|
| CE Marking |
|
| Finish | Rough machined |
| Finish Sandblasted and coated with zinc rich epoxy primer | |
| Weld Overlay Material | |
| Nickel plating |
|
| Final painting according to specification | |
| Cold galvanizing | N.A. |
| Teflon coating | N.A. |
| Mechanical Key Interlock | |
*= APPLICABLE AT REQUEST
QOC Solutions produce chiusure rapide per impianti a pressione e non, personalizzate ed ideate per rispondere ad ogni bisogno del cliente.
Tra i modelli ci sono le chiusure rapide filettate.
Le QOC filettate (THD) sono consigliate per l’utilizzo su apparecchi di dimensioni che variano da DN 2’’ a DN 12’’ con rating consigliato fino a ANSI 600.
Le chiusure rapide filettate sono azionate attraverso l’avvitamento/svitamento del coperchio/cap filettato al corpo hub saldato all’apparecchio.
| Product Information | |
| QOC Nominal Size | From 2″ to 12″ |
| QOC Design Code | ASME VIII Div. 1 / Div. 2 / EN 13445 |
| QOC Design Pressure Rating | Up to ANSI 600 |
| QOC Design Temperature (min/max) | -46°C / +350°C |
| Qoc Orientation | Horizontal/Vertical |
| Gasket Seal | O-Ring |
| Design Conditions | |
| Design Code ASME VIII Div. 1 | Yes |
| Code stamped |
|
| Vassel Wall Thickness | Acc. to the vessel |
| Vessel PWHT | |
| NACE Compliance (MR0175/ISO15156) | |
| Principal Materials | |
| Hub Material | Carbon steel/Stainless Steel/Duplex/Super Duplex |
| Door Material | Carbon steel/Stainless Steel/Duplex/Super Duplex |
| Gasket Seal | NBR/HNBR/VITON/KALREZ |
| Hinge/Davit Material | Carbon Steel / Stainless Steel |
| Pressure Warning Screw Material | Stainless Steel |
| Pressure Warning Screw Seal Material | HNBR |
| Certification | |
| Material Certification | Acc. to EN 10204 2.2/ 3.1/3.2 |
| Non-Destructive Testing | |
| M.P.I. On Weld End Preparation | |
| Dye Penetrant onWeld End Preparation | |
| Ultrasonic Examination | Yes |
| Other Requirements | |
| Inspection Requirements |
|
| ASME U/U2 – Stamp Partial |
|
| CE Marking |
|
| Finish | Rough machined |
| Finish Sandblasted and coated with zinc rich epoxy primer | |
| Weld Overlay Material | |
| Nickel plating |
|
| Final painting according to specification | |
| Cold galvanizing | N.A. |
| Teflon coating | N.A. |
| Mechanical Key Interlock | |
*= APPLICABLE AT REQUEST